Alesis Strike Amp 8 Electronic Drum Monitor Speaker

This is what Alesis say about the Strike Amp 8:

Your Practice Companion

Introducing the latest and most portable addition to the Alesis Strike Amp family – the Strike Amp 8. This electronic drum amp is your perfect practice companion, featuring a handsomely-housed 8” woofer and built-in mixer. Want to invite some friends over to jam? The Strike Amp 8 cuts through the mix so you won’t get drowned-out by your bandmates. Whatever the situation, the Alesis Drums Strike Amp Series are the best amps to power your drums.

2000 Watts of Power and Clarity

With 2000 watts of explosive bi-amplified power and super high-performance transducers, this speaker will always play loud and clear, in any space, in any situation—whether you’re performing, recording or rehearsing. The heavy-duty 8-inch low frequency driver really adds the “kick” to kickdrum. And the high-frequency compression driver in its computer-optimized waveguide conveys all the brilliance and snap of your snare drum and cymbals. Power. Precision. Drama. Using the Strike Amp 8 is like driving a race car that’s absolutely glued to the track and it never run out of horsepower.

Feature Packed - The BEST Amp to Power Your Drums!

But there’s a lot more to this speaker than just pure power and portability. A lot more. The Strike Amp 8 has all the versatility and features needed to fit in anywhere and it’s a snap to set up and use. You can use it vertically or tilt it back horizontally like a stage monitor. There’s an XLR output to link another Strike Amp 8 or send your performance to another input device. Need to customize the sound for that “just right” tone? Use the Contour EQ control. And the (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator means there is virtually unlimited hookup versatility and you’ll never unknowingly overdrive the speaker into distortion.

• Weight: 20.2lb/9.2kg 
• Dimensions (W x D x H): 17.1" x 10.1" x 9.6"
• Mounting: Standard 36mm Pole Socket
• Enclosure: Trapezoidal Design - Injection-Moulded Polypropylene Enclosure with Perforated Steel Grille 
• Power: Connection (IEC), Input Voltage (100V~. 110-120V~. 220-240V~; 50/60Hz - Switchable), Fuse (100-120V T10AL AC250V, 220-240V T5AL AC250V)
• Protection: Electronic Clip, Thermal & Transducer Overdrive 
• Indicators: Power LED (Rear Panel), Clip Limiter LED
• Connectors: x2 XLR/TRS 1/4" (6.35mm) Combo Inputs, x1 XLR Link Output, x1 IEC Power Cable Input 
• Equalisation: Contour Switch (with a Low and High Frequency +3dB Boost)
• Horn Coverage: 90 Degree Horizontal x 60 Degree Vertical (Nominal) 
• Frequency Range: 52Hz - 22kHz (-10dB) 
• Frequency Response: 62Hz - 20kHz (+3dB) 
• Max SPL: 129dB (Peak), 126dB (Continuous) (dB-SPL @ 1m)
• Crossover Frequency: 2.5kHz 
• Drivers: Low-Frequency - 8.0” (203mm) driver, 2.5” (65mm) High-Temperature Voice Coil, High-Frequency - 1.4” (35mm) Neodymium Driver with Precision Waveguide
• Output Power: 2000W (Peak, 1300 LF + 700 HF), 1000W (Continuous RMS, 650 LF + 350 HF)

• A smart ground-lift switch removes unwanted noise. 
• Use a contour EQ switch to shape your ideal sound. 
• Flexible and lightweight tilt-back design can also be mounted on a pole. 
• Use the XLR output to connect your Strike Amp 8 to another one, or send your sound to an alternative input device. 
• XLR/TRS combo inputs feature a dedicated clip indicator and volume controls.
• A meticulously voiced 8-inch woofer, combined with a high frequency compression driver projects your sound with unmatched response and accuracy without colouration. 
• Punch, power, clarity and plenty of headroom thanks to 2000 watts of peak power.