Pre Loved Boss OD-200 Hybrid Drive Overdrive & Distortion Pedal

This pre loved Boss OD-200 Hybrid Drive is in mint condition apart from velcro attached to the bottom of the pedal which partially restricts access to the battery compartment, but this can be removed if required.

The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analog/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There’s even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

Sampling Frequency - 96 kHz

AD/DA Conversion - 32 bits

Processing - 32-bit floating point

Drive Circuit - Analog + Digital

Modes -12 modes: OVERDRIVE, BLUES, SCREAM, CNTR OD, X-DRIVE, DIST, X-DIST, STACK DRIVE, FAT DIST, BROWN, X-METAL, FUZZ

Memory - 127 + Manual

Nominal Input Level - INPUT: -10 dBu

Maximum Input Level - INPUT: +7 dBu

Input Impedance - INPUT: 1 M ohm

Nominal Output Level - OUTPUT: -10 dBu

Maximum Output Level - OUTPUT: +7 dBu (Load Impedance: 220 k ohms or greater)

Output Impedance - OUTPUT: 1 k ohms

Recommended Load Impedance - OUTPUT: 10 k ohms or greater

Bypass - Buffered bypass

Controls: ON/OFF switch, MEMORY/BOOST switch, MODE knob, DRIVE knob, LEVEL knob, PARAM knob, LOW knob, MIDDLE knob, HIGH knob, PARAM button, MEMORY button

Display - 7 segments, 3 characters (LED)

Indicator - PARAM indicator, MEMORY (MAN, 1--4) indicators

Connectors - INPUT jack, OUTPUT jack: 1/4-inch phone type, CTL 1, 2/EXP jack: 1/4-inch TRS phone type, MIDI (IN, OUT) jacks: Stereo miniature phone type, DC IN jack, USB port: USB micro B-type (program update only)

Power Supply - Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)

Current Draw - 220 mA, Expected Battery Life Under Continuous UseAlkaline: Approx. 6 Hours
* These figures will vary depending on the actual conditions of use.

Accessories - Owner's Manual
Leaflet "USING THE UNIT SAFELY"
Alkaline battery (AA, LR6) x 3
Rubber foot x 4

Options - (sold separately)

AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

SIZE AND WEIGHT:

Width - 101 mm, 4 inches, Depth - 138 mm, 5-7/16 inches, Height - 63 mm, 2-1/2 inches, Height (including rubber foot) - 65 mm, 2-9/16 inches

Weight - 600g, 1 lb 6 oz

Weight (including battery) - 670g,  1 lb 8 oz

12 iconic overdrive & distortion sounds

Overdrive is one of the things that put Boss on the map. It’s no surprise, then, that the Series 200 gets its own overdrive workstation. The OD-200 features 12 stunning modes to play with:

• Overdrive
• Blues
• Scream
• Cntr Od
• X-drive
• Dist
• X-dist
• Stack Drive
• Fat Dist
• Brown
• X-metal
• Fuzz