by Zoom
MPN: B6
This item is currently out of stock but is still available to order
Call us now on 01603 623 563 and we can usually have the item ready in 3 to 5 days.
£425.00
This is what Zoom say about the B6 Bass Multi Effects Processor:
With four DI models and advanced multi-effects, the B6 gives you freedom to explore entirely new sounds.
Our new analog circuit, combined with the DI section vastly improves the low-frequencies of your instrument.
With an 88.2 kHz effects processor, double the rate of others, the B6 has your high end covered.
We meticulously modeled four iconic DI boxes to give you a wide variety of tonal options.
Tube 1 Vacuum tube DI character with rich harmonics and thick low frequencies.
Tube 2 Vacuum tube DI character with a clear attack and tight low frequencies.
Solid State 1 Delivers moderate compression and sharp tones for electric bass, while protecting against the loss of low frequencies when playing an upright bass with piezo pick-ups.
Solid State 2 Solid state DI character with a clear tone and little distortion.
Separate inputs allow you to A/B switch from electric bass to synth or acoustic bass, and back again.
Both inputs let you change the impedance from 1M to 10M ohms, giving you a cleaner tone for upright basses equipped with piezo pickups.
The B6 features 11 of the best amp models in history, plus a couple of new ones.
The B6 provides simulations of 12 classic bass cabinets, each with three variations based on mic positioning.
The B6 also delivers the ultimate collection of Zoom’s legendary effects, along with 10 new ones.
The 4.3-inch color touchscreen lets you drag, drop and rearrange effects to build the perfect signal chain in seconds.
Create loops and recordings up to two hours long, saved directly to an SD/SDXC card for instant access and recall.
*45-second looper without SD card.
Select from the B6’s 68 rhythm patterns in a range of styles, tempos and time signatures.
Connect to your computer via the micro-USB port to record directly to your DAW.
MAXIMUM NUMBER OF SIMULTANEOUS EFFECTS: | 6 |
USER PATCHES: | 240 |
SAMPLING FREQUENCY: | 88.2KHz |
A/D CONVERSION: | 24-bit 128x oversampling |
D/A CONVERSION: | 24-bit 128x oversampling |
SIGNAL PROCESSING: | 32-bit |
FREQUENCY CHARACTERISTICS: | 20 Hz ~ 40 kHz +0.5 dB –0.5dB(10 kΩ load) |
DISPLAY: | 4.3" TFT color LCD (480 x 272 pixels) |
INPUTS 1/2: | Standard mono phone jack |
Rated input level: -20 dBu | |
Input impedance (line):1 / 10 MΩ(Select by Switch) | |
RETURN: | Standard mono phone jack |
Rated input level: -20 dBu | |
Input impedance (line): 1 MΩ | |
AUX IN: | Stereo mini jack |
Rated input level: -10 dBu | |
Input impedance (line): 10 kΩ |
AMP OUT/PHONES | Standard mono phone jack |
Maximum output level (line): +11.4 dBu (when output impedance 10 kΩ or higher) | |
Headphones 24 mW + 24 mW (at 32 Ω load) | |
OUTPUT | XLR jack |
Impedance: 100 Ω (HOT-GND, COLD-GND), 200 Ω (HOT-COLD) | |
GND LIFT (Select by switch) | |
SEND | Standard stereo phone jack |
Maximum output level (line): +11.4 dBu (when output impedance 10 kΩ or higher) | |
AMP OUT/PHONES | -96.0 dBu |
OUTPUT | -100.0 dBu |
SEND | -99.0 dBu |
CONTROL INPUT | FP02M input |
POWER | AC adapter ( 9v DC 500mA, center negative) (Zoom AD-16) |
USB | Port: USB 2.0 Micro-B/Supported cable type: Micro-B |
Guitar Lab: USB 1.1 Full Speed | |
Audio Interface: USB 2.0 Full Speed, 44.1 kHz(32-bit)/88.2kHz(16-bit), 2 in, 2 out | |
- Use a USB cable that supports data transfer. USB bus power is not supported | |
STANDARDS | Cards that support SD/SDXC/SDHC specifications (class 10 or higher) |
LOOPER | 44.1 kHz/ 16-bit stereo WAV |
IR | 44.1 - 192kHz, 16/24/32-bit WAV |
REMOTE | ZOOM BTA-1 or other dedicated wireless adapter |
EXTERNAL DIMENSIONS | 228 mm (D) x 418 mm (W) x 65 mm (H) |
WEIGHT | 1.89 kg |
Note: 0 dBu = 0.775 V |